KELSO Grate is a one-piece, reinforced polyester or vinylester (FRP) grating, available in standard panels and sizes.
It is manufactured by interweaving continuous, thoroughly wetted, fiberglass strand with thermosetting resin systems.
Standard panels are available in four resin systems, two top surface configurations, four panel sizes and five standard grid patterns.
Typical applications include floor systems, walkways, work platforms, stairs, ramps, trench covers and catwalks. KELSO grate has been successfully used in many industries - including food processing, beverage, chemical processing, water & wastewater treatment, metal finishing, pulp/paper, transportation, pharmaceutical, textile, oil/gas and mining/smelting/refining.
Standard Resin Systems Standard KELSO Grate resin systems are made from premium grade resins. The three standard resin systems are: PFR: Polyester resin system with Class 1 fire retardancy, per ASTM E-84. Moderate corrosion resistance.
IFR - Premium grade Isophthalic Polyester resin system with Class 1 fire retardancy, per ASTM E-84. Excellent corrosion resistance.
PFR & IFR Resin systems meet USDA standards for incidental food contact.
Available Colors For PFR & IFR are green, yellow, dark grey, & light gray.
VFR - Vinyl Ester resin system with Class 1 fire retardancy, per ASTM E-84. For maximum corrosion resistance in KELSO Grate standard resin systems, specify VFR.
Available Colors:
Orange & Dark Gray
Other resin systems and colors are available on special order. All KELSO Grate resin systems incorporate an ultraviolet (UV) inhibitor.
Available Top Surfaces:
Grit top - integral, embedded silica sand, to a nominal depths of 3/16"
Applied Grit - epoxy grit bonded to meniscus top panels
Meniscus - concave, half- moon cross section
Standard Grid Patterns
KELSO Grate molded grating is available in five standard grid patterns. Grid dimensions are center line to center line.
1" thick, 1" x 4", rectangular grid Bearing bars 0.3125" thick Cross bars 0.5625" thick Open area of 60% Designation is RM-1410
1 1/2" thick, 1" x 6", rectangular grid Bearing bars 0.375" thick Cross bars 0.375" thick Open area of 63% Designation is RM-1615
1" thick, 1 1/2" x 1 1/2", square grid Bearing bars 0.2350" thick Cross bars 0.2350" thick Open area of 70% Designation is GG-1510
1 1/2" thick, 1 1/2" x 1 1/2", square grid Bearing bars 0.250" thick Cross bars 0.250" thick Open area of 70% Designation is GG-1515
2" thick, 2" x 2", square grid Bearing bars 0.3125" thick Cross bars 0.3125" thick Open area of 72% Designation is GG-2020
STANDARD PANEL SIZES & WEIGHTS RM-1410: 4’ wide x 12’ long, 170 lbs RM-1615: 4’ wide x 12’ long, 218 lbs GG-1510: 3’ wide x 10’ long, 91 lbs 4’ wide x 12’ long, 140 lbs GG-1515: 3’ wide x 10’ long, 124 lbs 4’ wide x 8’ long, 131 lbs 4’ wide x 12’ long, 193 lbs 5’ wide x 10’ long, 203 lbs GG-2020: 4’ wide x 12” long, 205 lbs
Pultruded FRP Grating
Pultrusion is a continuous molding process in which glass roving, glass matting, and a synthetic surface veil are literally "pulled" simultaneously through a flame-retardant polyester or vinylester resin bath. Desired geometric shapes are formed and solidified as they are pulled through a heated steel die.
KELSO grating provides the ultimate combination of strength, corrosion resistance, and structural integrity.
Standard Resin Systems KELSO’s standard resin systems meet ASTM E-84 Class 1 flame rating, and include UV inhibitors for applications involving continuous exposure to the sun. Choose from the following standard resin systems. Ask us about creating special resins for unique environments, such as low smoke, low toxicity, or extra low flame applications.
IFR - Made with a premium-grade isophthalic polyester flame-retardant resin system. Standard colors are yellow and gray for pultruded grating. WT grating and one inch I-bar gratings are also available in white.
VFR - Made with a premium-grade vinylester flame-retardant resin system for added protection against corrosion. Standard colors are yellow and gray for pultruded grating.
Standard Top Surfaces Grit top - A slip-resistant coarse epoxy grit is bonded to the walking surfaces for improved traction.
Pultruded Wide T-Bar Grating ADA Requirements for Spacing Met!
The unique “T” bar shape of pultruded fiberglass grating provides a more solid walking surface than the traditional “T” bar shape. The “T” bar is non-corrosive and is available in 1, 1–1/2, or 2 inch heights.
KELSO High Load Capacity Grating
Molded & Pultruded High Load Capacity grating is yet another product in the aresenal of engineered FRP solutions by KELSO.
While capitalizing on some of the traditional benefits of molded grating products - high strength, corrosion resistance, fire retardancy, nonconductivity and low maintenance - this specially manufactured molded FRP product has been engineered to cary from loads from forklifts up to H20 loads that traditional molded FRP grating products are unable to support.
