We offer a Full Range Of Industrial Solid-Liquid Separation Filtration Equipment & Supplies For Continuous Or Batch Operations Recovering Process Liquids, Solids To 0.1 Micron, Or Both.
Defining The Best Filtration Technology For Your Industrial Process The chart provided above provides some useful guidelines when defining the optimum filtering technology for Your industrial process. Compare Your required flow rate and the solids content of Your process stream to the curves for different filtration and drying equipment provided on the log-scale chart.
Tubular Filters are ideal for continuous filtration of process streams with low solids loading (<200 ppm) and high flow rates:
TE Series Tubular Filters - Allow continuous filtration at flow rates from 1 to 5,000 gpm, with particle retention down to 1 micron.
PTE Series Tubular Filters - Allow continuous filtration of almost any corrosive liquid with particle retention down to 1 micron.
PC Series Tubular Filters - Use precoat technology to allow continuous filtration with particle retention down to 0.1 micron and 50% faster backwash.
PVC Series Tubular Filters - Designed for water and mildly aggressive process streams to 1 micron, or low solids loading filtration for processes utilizing PVC piping.
Backwash Control - Manual or Automatic is available for all tubular filters, and a wide variety of Filter Media are available to suit your process requirements.
Pressure Leaf Filters are ideal for batch filtration of process streams with up to about 6 wt% solids loading, depending on application, and high flow rates:
Horizontal Pressure Leaf Filters - Maximize filtration area, and are suited to larger process requirements - Type HC Wet Cake Discharge Filters are sluicing discharge mode horizontal pressure leaf filters. - Type DHC Dry Cake Discharge Filters are vibrating discharge mode horizontal pressure leaf filters.
Vertical Pressure Leaf Filters - Minimize footprint, and are suited to small to mid-range process requirements. - Type V Wet Cake Discharge Filters are sluicing discharge mode vertical pressure leaf filters. - Type DV Dry Cake Discharge Filters are vibrating discharge mode vertical pressure leaf filters. - Type VH Vertical Tank Horizontal Leaf Filters allow for sluicing away of the cake without opening the tank.
Filter Presses are ideal for batch filtration of industrial / municipal liquid and slurry process streams with high solids loading (3-30 wt%):
EP Sidebar Filter Presses - Offer economical operation and most units require only compressed air utility feed.
QP Overhead Filter Presses - Utilize 4-sidebar construction, and offer enhanced performance in the most severely demanding applications.
Sludge Dryers are ideal for supplemental dewatering of sludge cake (>25 wt% solids), greatly reducing volume and weight:
Enviro Dri Sludge Dryers - Typically used in conjunction with a filter press where the filter press discharges its cake directly into the dryer. This integrated design provides a small footprint.
